Complete TD/PM Circle Lighting and Lit helidecks identification marking ("H") lighting system for Helidecks Offshore platforms. All excisting and new platforms must have this system installed and working before January 2018.

System consists of the following parts:
- System Controller Unit
- TD/PM Circle segments
- "H" marking sub-segments
- Cable ducts with brackets and cable

Suitable for use in Zone 2 and Safe Zone

Enclosure: Aluminium
chromated and powder coated Yellow RAL 1021 (optional)
Lens Borosilicate glass tempered colour clear
Light source: high brightness LED's
Flash rate 120 Fpm (2Hz)
Input voltage 90-255 Vac 50/60 Hz Variable
Power consumption Max. 100 Watt
Light output >700 Cd, 2°- 10° and > 176 Cd 0°- 90°
Dimmed configuration 60 Cd. Max.
Ambient temp. -40° C to +55° C
Ingress protection IP 66
Compliances ICAO Annex 14 Vol. II
UK CAP 437
Atex. Zone 1, 21, 2, 22 and Safe Zone

Direct installation onto the helidecks
Extra flat ring, diameter 180 mm
Cast Aluminium body
Clear Borosilicate glass, rollover type
Available with White, Green, Blue, Yellow
and Red High Brightness LED
Power consumption 5 Watt max.
90-255 Vac. or 9-40 V ac/dc.
Light output > 32,5 Cd.

ICAO Annex 14 Vol. II
UK CAP 437
UK CAP 168

Enclosure: Aluminium, chromated and powder coated Yellow RAL 1021
Dimensions 160 x160 x180 mm
Junction box 110 x 70 x 55 mm
Lens Borosilicate glass tempered colour green
Cable gland 2 x M20
Light source High Power LED Service life >75.000 hours Colour Red
Input Voltage 90-264 Vac or 110-370 Vdc 50/60 Hz Variabel
Power consumption approx 5 Watt
Light output >32.5 Cd.
Ambient temp. -40° C to +55° C
Ingress protection IP 67
Compliances ICAO Annex 14 Vol. II
UK CAP 437

IMO 2009 MODU CODE
Atex. II 3 G Ex nA IIC T5

Enclosure: Aluminium, chromated and powder coated Yellow
Dimensions 160 x160 x180 mm
Junction box 110 x 70 x 55 mm
Lens Borosilicate tempered glass colour red
Cable gland 2 x M20 Standard
Light source High Power LED Service life >75.000 hours Colour Red
Input Voltage 90-264 Vac or 110-370 Vdc 50/60 Hz Variabel
Power consumption approx 5 Watt
Light output >50 Cd
Ambient temp. -40° C to +50° C
Ingress protection IP 67
Compliances ICAO Annex 14 Vol. II
UK CAP 437

10 mm safety glass EN 12150
LED 10 Watt.
Suitable for variable input 90-255 Vac
Ingress Protection IP 67
In compliance with CAP 437
Suitable for Zone 2 and safe area.

Flush Touch screen control panel
- Touch screen 17”
- Windows embedded computer (Windows 7)
- PCU (power control unit)

The panels are custom build
To be used with a controller

Up to 16 switching positions possible
- Perimeter lights
- Floodlights
- Wind sock
- Status light
- Obstruction lights

Standard controller 6 groups
Standard voltage 380 Vac

The HA-RRC allows remote control of any connected equipment by means of a coded radio signal, consisting of a sequence of carrier pulses. It activates relays for 15 minutes, the relays auto switch-off after 15 minutes after the last reception of an radio signal.

Foldable sign, to be used when the helidecks may not be used Size in compliance with CAP 437 4,00 x 4,00 Mtr.
Standard with storage-bag and 8 x 4 meter tie-down rope.

Very strong
Lightweight
aluminium-pe sandwich material
Available in white, yellow, orange
Available with retroreflective surface.

Wheel Chock set
Small/Medium aircraft chock is a durable extruded EPDM rubber chock, suitable for all wheels on Small/Medium Aircraft.
2 pieces roped for ease of use (to place at front & back of the wheel) A must for GSEs (ground service equipment).
Comes standard with yellow vinyl chock tape.

Holland Aviation's solution for solar powered obstruction ligths.
autonomous operation time: Approx. 32 days

Holland Aviation's solution for solar powered obstruction ligths.
autonomous operation time: Approx. 4 days
Technical information can be found in the datasheet.

Obstruction light HA-OL
111 mm red refractor lens
For obstructions up to 45 metres/150 feet height
In compliance with ICAO Annex 14
Low Intensity> 10 candela Class A
Low intensity > 32,5 Candela Class B
Heavy aluminium body powdercoated
Red lens
220/240 Volt 75 Watt lamp 8000 hours lifetime E 27 lampholder
90-255 Vac 5 Watt LED
1/2" threading in the bottom of the body

HA-OL2 Double Obstruction Light mounted on a bull horn. ICAO Low Intensity for obstructions/obstacles up to 45 meters/150 feet height
HA-OL2R Double obstruction light with automatic relais. If the main lamp fails, the standby lamp will automatically be switched on. Only available in incandescent version.
In compliance with ICAO Annex 14
Low Intensity> 10 candela Class A
Low intensity > 32,5 Candela Class B
Heavy aluminium body powder coated
Red glass lens
E27 lampholder. 220/240 Volt 75-100 Watt lamp 8000 hours lifetime
90-255 Vac. 5 Watt LED
1/2" threading in the bottom of the body

Enclosure: Aluminium, chromated and powder coated Yellow RAL 1021
Dimensions 160 x160 x180 mm
Junction box 110 x 70 x 55 mm
Lens Borosilicate glass tempered colour red
Cable gland 2 x M 20
Light source High Power LED
Expected Service life >75.000 hours Colour Red
Input Voltage 90-264 Vac or 110-370 Vdc 50/60 Hz Variabel
Power consumption: Approx 5 Watt
Light output >50 Cd
Ambient temp. -40° C to +55° C
Ingress protection IP 67

Compliances
- ICAO Annex 14 Vol. II (low intensity Type A and B)
- UK CAP 437
- Atex zone 2 ATEX II 3 G Ex nA IIC T5

Single low intensity obstruction light, cast aluminium body, Ingress Protection IP66/67.
Light source: High Power red LED
Power supply: multi voltage input between 100-240VAC 50/60Hz. (12/24 Volt DC optional), 1 x M20 EX Cable Gland for cable entry.
Suitable for ATEX Zone 1 and 21. II 2GD EExd IIC T3.
In compliance with ICAO Annex 14 Group A >10 Cd. and Group B >32,5 Cd.