Heliport light elevated HA-ELD
In compliance with ICAO Annex 14 Vol. II Heliports
Cast Aluminium body
133 mm green dome lens
Also available with yellow lens or clear lens as FATO or Approach light or with blue lens as taxiway light
E 27 Lampholder

Optional parts:
220/240 Volt lamp 8000 hours lifetime
Base flange with stand

Helideck inset light HA-ILD LS 180

Direct installation onto the helideck
Extra flat ring, diameter 180 mm
Cast Aluminium body
Clear Borosilicate glass, rollover type
Available with White, Green, Blue, Yellow
and Red High Brightness LED
Power consumption 5 Watt max.
90-255 Vac. or 9-40 Vac/dc.
Light output > 32,5 Cd.

ICAO Annex 14 Vol. II
UK CAP 437
UK CAP 168
Atex Zone 2

Professional Halogen floodlight mounted on a mounting flange with frangible coupling.
220/240 Volt 300 or 500 Watt.
Complete with anti glare shield

Clear white heliport beacon. Suitable as long-range visual guidance and/or heliport identification lighting.

Aluminium chromated and powder coated enclosure.
Borosilicate glass lens
Light source High Power LED’s
Service life >50.000 hours
Flash rate 30 Fpm in the format of the morse code letter H (... ...)
Input voltage 90-255 Vac 50/60 Hz Variable
Power Consumption Max. 100 Watt.
Light output >2500 Cd (± 10%)
Brilliancy control: 100%, 10% and 3 %
Ingress protection IP 67

In compliance with ICAO Annex 14 Vol. II Heliports

HA OSH 11 LED Helideck Perimeter light
Enclosure: Aluminium, chromated and powder coated Yellow RAL 1021
Dimensions 160 x160 x180 mm
Junction box 110 x 70 x 55 mm
Lens Borosilicate glass tempered colour green
Cable gland 2 x M20
Light source High Power LED Service life >75.000 hours Colour Red
Input Voltage 90-264 Vac or 110-370 Vdc 50/60 Hz Variabel
Power consumption approx 5 Watt
Light output >32.5 Cd.
Ambient temp. -40° C to +55° C
Ingress protection IP 67
Compliances ICAO Annex 14 Vol. II
UK CAP 437

IMO 2009 MODU CODE
Atex. II 3 G Ex nA IIC T4

HA-OSH 11 LED Helideck obstruction light
Enclosure: Aluminium, chromated and powder coated Yellow
Dimensions 160 x160 x180 mm
Junction box 110 x 70 x 55 mm
Lens Borosilicate tempered glass colour red
Cable gland 2 x M20 Standard
Light source Super bright LED's Service life >75.000 hours Colour Red
Input Voltage 90-264 Vac or 110-370 Vdc 50/60 Hz Variabel
Power consumption approx 5 Watt
Light output >50 Cd
Ambient temp. -40° C to +50° C
Ingress protection IP 67
Compliances ICAO Annex 14 Vol. II
UK CAP 437
Atex. II 3 G Ex nA IIC T4

Flush Touch screen control panel

- Touch screen 17”
- Windows embedded computer (Windows 7)
- PCU (power control unit)

The panels are custom build
To be used with a controller
Up to 16 switching positions possible
- Perimeter lights
- Floodlights
- Wind sock
- Status light
- Obstruction lights

Standard Controller/Switch board with 6 groups
Standard input voltage 380 Vac

The HA-RRC allows remote control of
any connected equipment by means of
a coded radio signal, consisting of a
sequence of carrier pulses. It activates
relays for 15 minutes, the relays auto
switch-off after 15 minutes after the last
reception of an radio signal.

Helicopter approach path indicator
Provides three colour (red, green, white) approach path information
Powder coated in yellow RAL 1023
All fasteners stainless steel

An approach lighting system should be provided at a heliport where it is desirable and practicable to indicate a preferred approach direction. (ICAO Annex 14 Vol. II.

HA-APPL
Heliport Approach Light System. System contains 7 steady burning approach lights, omni-directional complete with system controller to control the light output (100%, 30% and 10%). Suitable for VFR approaches. In compliance with ICAO Annex 14 Vol. II, section 5.3.3.

Options: Extra lights up to a total max. of 11 pieces.