Unlighted Airport/Heliport Windsock HA80 RG and HA120 RG
In compliance with ICAO Annex 14
Suitable for airports, heliports, traffic purposes and industry
HA80 RG,For windsocks up to Ø 50 cm
HA120 RG, For windsocks up to Ø 100 cm
Option: mast powdercoated white, red/white or orange
Temperature: -55 C / +55 C
Windspeed: up to 75 Knots (140 km/h)
Parts:
Foundation tube/plate, steel galvanised
Mast support steel galvanised
Mast, HA80 RG aluminium Ø 80 mm, maximum length 6 mtrs
Mast, HA120 RG aluminium Ø 120 mm, maximum length 6 mtrs
Swivelframe Stainless steel/PVC bearing housing
2 heavy duty stainless steel roller bearings.
Windsock, Red/white or Orange
Internally Lighted Airport/Heliport Windsock HA-80 RG and HA-120 RG
In compliance with ICAO Annex 14
Suitable for airports, heliports, traffic purposes and industry.
Specifications:
Same as Windsock assemblies HA-80 RG and HA-120 RG unlighted.
Internally lighted:
No moving electrical parts
Swivelhead with internal PL energy saving lamp
L-810 type obstruction light red, mounted on top
Junction box mounted on mast support
Power supply:
230 Volt, 50/60 Hz or 115 Volt, 50/60 Hz or 6,6 Ampère, airport lighting system
Externally Lighted Airport/Heliport Windsock HA-80 RG and HA-120 RG
In compliance with ICAO Annex 14
Suitable for airports, heliports, traffic purposes and industry.
Specifications:
same as Windsock assemblies HA80 RG and HA120 RG unlighted.
Externally lighted:
Uppermast 100 cm
4 LED floodlights 10 Watt each
L-810 type obstruction light red, mounted on top
Junction box mounted on mast support
Power supply:
230 Volt, 50/60 Hz or 115 Volt, 50/60 Hz or 6,6 Ampere, airport lighting system
Lighted Airport/Heliport Windsock HA-120 RG SOLAR
HA-120 RG Solar Powered Windsock Assembly
Stand Alone Solar Powered
Especially suitable for remote area’s and area’s without electricity network infrastructure
Operates fully automatic 365 days year around
– Back up battery 105 Ah (125 Hour)
– L810 LED Obstruction Light
– LED internal lighting
L-807 Windsock assemblies
In Compliance with FAA AC150/5354-27D
This windsock assembly is basically the same as HA-120 RG but with a mast length of 480 cm, windsock frame length 135 cm, Windsock full orange and all metal part powder coated in orange.
Windsock assembly HA-80/806 Ex
Internally lighted windsock assembly with explosion proof lighting.
In compliance with ICAO Annex 14 Vol II Heliports, CAP 437 and ATEX II 2 G/D EEx dIIB, T4,T5,T6.
Suitable for use in Hazardous areas, Off-shore Helidecks etc.
Ambient temperature: -20 C/ + 50 C
Windspeeds > 75 Knots ( 140 Km/H)
Parts:
– All metal parts stainless steel AISI 316L
– Mounting flange.
– Mast. Ø 76,1 mm, length 3 mtr. (other lengths on request)
– Swivelhead internally lighted, complete with frame and obstruction light.
– Two heavy duty stainless steel sealed roller bearings.
– Windsock, Red/white or Orange.
– Junction Box mounted on the lower side of the mast
HA 80 RG Ex Zone 1 Windsock assembly
Windsock assembly for Off Shore Helidecks and Hazardous areas
Data:
Material Stainless steel 316L
Dimensions Mast length max. 6000 mm
Windsock 300 x 1200 mm or 600 x 2400 mm (other sizes are possible)
Internal lighting Fluorescent tube 2 x 8 watt
Obstruction light LED red
Power supply 230 Vac, 115 Vac or 24 Vdc
Compliances:
ICAO Annex 14
CAP 437
Atex II 2 G Ex d IIC T5
Helideck windsock system HA 80 FL
New windsock system complete with windsock Internally lighted and unlighted version
Stainless steel alloy AISI 316
Specially designed for use at helidecks on offshore oil riggs and on survey, supply and FPSO vessels. Easy to install in any place you prefer.
HA-80 FL EX Zone 1 Windsock Assembly
Windsock assembly for Off Shore Helidecks and Hazardous areas. Especially designed for installation on every possible required place.
Material Stainless steel AISI 316
Dimensions Mast length approx. 200 mm
Internal lighting Fluorescent tube 2 x 8 watt
Obstruction light Red 1 Watt LED
Power supply 230 Vac or 115 Vac
Compliances:
ICAO Annex 14
CAP 437
Atex II 2 G Ex d IIC T5
HA-80/L806 Airport windsock Internally lighted
Close by runway type windsock in compliance with FAA AC 150/5345-27D
Temperature: – 55 C / + 55 C
Windspeed: up to 75 Knots (140 km/hr)
Parts:
Mounting flange
Frangible coupling
Mast aluminium dia 80 mm, length 1800 mm
Swivelhead with internal PL energy saving lamp
Windsockframe dia 450 mm, length 900 mm
Windsock colour orange, dia 45 x 245 cm length (18″Inch x 8 ‘Feet’)
L-810 type obstruction light red mounted on top
All metal parts powdercoated in orange
Power supply:
230 Volt 50/60 Hz or 115 Volt 50/60 Hz or 6,6 Ampere airport lighting system
Replacement windsocks
Standard colours: red/white or orange
Standardsizes:
Windsocks Ø 30 X 150 cm
Windsocks Ø 30 X 180 cm
Windsocks Ø 40 X 250 cm
Windsocks Ø 50 X 150 cm
Windsocks Ø 60 X 240 cm
Windsocks Ø 60 X 300 cm
Windsocks Ø 65 X 300 cm
Windsocks Ø 70 X 200 cm Mouth reinforced with leather
Windsocks Ø 90 X 360 cm
Windsocks Ø 90 X 390 cm
Windsocks Ø 90 X 450 cm
Windsocks Ø 100 X 500 cm
Other sizes and colours on request