[vc_row][vc_column width=”1/2″][vc_single_image image=”851″ img_size=”thumb-medium” img_align=”center” css_animation_delay=”100″][vc_column_text]

Helidecks HA-SLS LED Helidecks Status light System

Enclosure: Aluminium
chromated and powder coated Yellow RAL 1021
Lens Borosilicate glass tempered colour clear
Light source: high brightness LED’s
Flash rate 120 Fpm (2Hz)
Input voltage 90-255 Vac 50/60 Hz Variable
Power consumption Max. 100 Watt
Light output >700 Cd, 2°- 10° and > 176 Cd 0°- 90°
Dimmed configuration 60 Cd. Max.
Ambient temp. -40° C to +55° C
Ingress protection IP 67

Helidecks Status Light:
Compliances ICAO Annex 14 Vol. II
UK CAP 437
Atex. II 3 G Ex nA IIC T4[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_single_image image=”853″ img_size=”thumb-medium” img_align=”center” css_animation_delay=”100″][vc_column_text]

Helidecks HA-TD/PM Circle Lighting System

Complete TD/PM Circle Lighting and Lit helidecks identification marking (“H”) lighting system for Helidecks Offshore platforms. All excisting and new platforms must have this system installed and working before January 2018.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”854″ img_size=”thumb-medium” img_align=”center” css_animation_delay=”100″][vc_column_text]

Helidecks HA-SLS Z1 LED Helidecks Status light System

HA-SLS Z1 Zone 1 Helidecks Status Light System

[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_single_image image=”855″ img_size=”thumb-medium” img_align=”center” css_animation_delay=”100″][vc_column_text]

Helidecks rollover flush inset light HA ILD LS 180

Helidecks inset light HA-ILD LS 180

Direct installation onto the helidecks
Extra flat ring, diameter 180 mm
Cast Aluminium body
Clear Borosilicate glass, rollover type
Available with White, Green, Blue, Yellow
and Red High Brightness LED
Power consumption 5 Watt max.
90-255 Vac. or 9-40 V ac/dc.
Light output > 32,5 Cd.

ICAO Annex 14 Vol. II
UK CAP 437
UK CAP 168
Atex Zone 2[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”856″ img_size=”thumb-medium” img_align=”center” css_animation_delay=”100″][vc_column_text]

HA-OSH 11 LED Helidecks Perimeter Light CAP 437

HA OSH 11 LED Helidecks Perimeter light
Enclosure: Aluminium, chromated and powder coated Yellow RAL 1021
Dimensions 160 x160 x180 mm
Junction box 110 x 70 x 55 mm
Lens Borosilicate glass tempered colour green
Cable gland 2 x M20
Light source High Power LED Service life >75.000 hours Colour Red
Input Voltage 90-264 Vac or 110-370 Vdc 50/60 Hz Variabel
Power consumption approx 5 Watt
Light output >32.5 Cd.
Ambient temp. -40° C to +55° C
Ingress protection IP 67
Compliances ICAO Annex 14 Vol. II
UK CAP 437

[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_single_image image=”857″ img_size=”thumb-medium” img_align=”center” css_animation_delay=”100″][vc_column_text]

HA-OSH 11 LED Helidecks Obstruction light

HA-OSH 11 LED Helidecks obstruction light
Enclosure: Aluminium, chromated and powder coated Yellow
Dimensions 160 x160 x180 mm
Junction box 110 x 70 x 55 mm
Lens Borosilicate tempered glass colour red
Cable gland 2 x M20 Standard
Light source High Power LED Service life >75.000 hours Colour Red
Input Voltage 90-264 Vac or 110-370 Vdc 50/60 Hz Variabel
Power consumption approx 5 Watt
Light output >50 Cd
Ambient temp. -40° C to +50° C
Ingress protection IP 67
Compliances ICAO Annex 14 Vol. II
UK CAP 437
Atex. II 3 G Ex nA IIC T5[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”858″ img_size=”thumb-medium” img_align=”center” css_animation_delay=”100″][vc_column_text]

HA OSFX L12 Helidecks Floodlight

Powder coated sea water resistant aluminium housing.
10 mm safety glass EN 12150
LED 10 Watt.
Suitable for variable input 90-255 Vac
Ingress Protection IP 67
In compliance with CAP 437
Suitable for Zone 2 and safe area.
Atex II 3G Ex nA IIC T4[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_single_image image=”859″ img_size=”thumb-medium” img_align=”center” css_animation_delay=”100″][vc_column_text]

HA-TC touch screen operator panel

Flush Touch screen control panel

– Touch screen 17”
– Windows embedded computer (Windows 7)
– PCU (power control unit)

The panels are custom build
To be used with a controller
Up to 16 switching positions possible
– Perimeter lights
– Floodlights
– Wind sock
– Status light
– Obstruction lights

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”860″ img_size=”thumb-medium” img_align=”center” css_animation_delay=”100″][vc_column_text]

Lighting Controller

Standard controller 6 groups
Standard voltage 380 Vac[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_single_image image=”861″ img_size=”thumb-medium” img_align=”center” css_animation_delay=”100″][vc_column_text]

HA-RRC Radio Receiver Controller

The HA-RRC allows remote control of
any connected equipment by means of
a coded radio signal, consisting of a
sequence of carrier pulses. It activates
relays for 15 minutes, the relays auto
switch-off after 15 minutes after the last
reception of an radio signal.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”863″ img_size=”thumb-medium” img_align=”center” css_animation_delay=”100″][vc_column_text]

Prohibited Landing Marker for Helidecks

Foldable sign, to be used when the helidecks may not be used
Size in compliance with CAP 437 4,00 x 4,00 Mtr. Standard with storage-bag and 8 x 4 meter tie-down rope.[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_single_image image=”864″ img_size=”thumb-medium” img_align=”center” css_animation_delay=”100″][vc_column_text]

Marshalling Bats

Very strong
Lightweight
aluminium-pe sandwich material

Available in white, yellow, orange
Available with retroreflective surface.[/vc_column_text][/vc_column][/vc_row][vc_double_section][vc_double_section_container width=”1/2″][vc_single_image image=”865″ img_size=”thumb-medium” img_align=”center” css_animation_delay=”100″][vc_column_text]

Wheel Chock Set for use on Heliports and Helidecks

Wheel Chock set

Small/Medium aircraft chock is a
durable extruded EPDM rubber chock,
suitable for all wheels on Small/Medium
Aircraft.
2 pieces roped for ease of use (to place
at front & back of the wheel) A must for
GSEs (ground service equipment).
Comes standard with yellow vinyl chock
tape.[/vc_column_text][/vc_double_section_container][vc_double_section_container width=”1/2″][vc_single_image image=”866″ img_size=”thumb-medium” img_align=”center” css_animation_delay=”100″][vc_column_text]

HA Solar Obstruction light 10 and 30cd

Holland Aviation’s solution for solar powered obstruction ligths.

autonomous operation time: Approx. 32 days

Technical information can be found in the datasheet.[/vc_column_text][/vc_double_section_container][/vc_double_section][vc_double_section][vc_double_section_container width=”1/2″][vc_single_image image=”867″ img_size=”thumb-medium” img_align=”center” css_animation_delay=”100″][vc_column_text]

HA Solar Obstruction light 200cd

Holland Aviation’s solution for solar powered obstruction ligths.

autonomous operation time: Approx. 4 days

Technical information can be found in the datasheet.

 

 

[/vc_column_text][/vc_double_section_container][vc_double_section_container width=”1/2″][/vc_double_section_container][/vc_double_section]